The MAX263/264 and MAX267/268 CMOS switched-capacitor active filters are designed for precision filtering applications. Center frequency, Q, and operating mode are all selected via pin-strapped inputs. The MAX263/264 uses no external components for a variety of bandpass, lowpass, highpass, notch and allpass filters. The MAX267/268 is dedicated to bandpass applications and includes an uncommitted op-amp. Two second-order filter sections are included in both devices. An input clock and a 5-bit programming input precisely set the filter center/corner frequency. Q is also programmed from 0.5 to 64. Separate clock inputs for each filter half operate either an external clock or a crystal. The MAX263 and 267 operate with center frequencies up to 57kHz while the MAX264 and 268 extend the f0 range to 140kHz by employing lower fCLK/f0 ratios. The MAX263/264 is supplied in 28 pin wide DIP and small outline packages while the MAX267/268 is supplied in 24 pin narrow DIP and wide SO packages. All devices are available in commercial, extended, and military temperature ranges.
性格描写
- 32-Step Center Frequency Control
- 128-Step Q Control
- Independent Q and f0 Programming
- Guaranteed Clock to f0 Ratio—1% (A grade)
- 75kHz f0 Range (MAX264/268)
- Single +5V and ±5V Operation
(商品画像：イメージ図）
技術パラメーター
-
Number of Channels
-
2
-
Cutoff Frequency
-
57 kHz
-
最大電源電圧
-
12.6 V
-
電源電圧 Min
-
4.74 V
-
最高使用温度
-
+ 70 C
-
マウントスタイル
-
SMD/SMT
-
パッケージ/ケース
-
SOIC-24 Wide
-
パッケージング
-
リール
-
最低使用温度
-
0 C
MAX267ACWG-T Datasheet
-
MAX267 data sheet for guidance
ダウンロード