MAX275ACWP-T

The MAX274 and MAX275ACWP-T are continuous-time active filters consisting of independent cascadable 2nd-order sections. Each section can implement any all-pole bandpass or lowpass filter response, such as Butterworth, Bessel, Chebyshev, and is programmed by four external resistors. The MAX274/MAX275ACWP-T provide lower noise that switched-capacitor filters, as well as superior dynamic performance—both due to the continuous-time design. Since continuous-time filters do not require a clock, aliased and clock noise are eliminated with the MAX274/MAX275. The MAX274 comprises of four 2nd-order sections, permitting 8th-order filters to be realized. Center frequencies range up to 150kHZ, and are accurate to within ±1% over the full operating temperature range. Total harmonic distortion (THD) is typically better than -86dB. The MAX275ACWP-T comprises of two 2nd-order sections, permitting 4th-order filters to be realized. Center frequencies range up to 300kHZ, and are accurate to within ±0.9% over the full operating temperature range. Total harmonic distortion (THD) is typically better than -86dB. Both filters operate from a single +5V supply or from dual ±5V supplies.

Charakterisierung

• Continuous-TIme Filter – No Clock, No Clock Noise
• Implement Butterworth, Chebyshev, Bessel and Other Filter Responses
• Lowpass, Bandpass Outputs
• Operate from a Single +5V Supply or Dual ±5V Supplies
• Design Software Available
• MAX274 Evaluation Kit Available
• 8th-Order-Four 2nd-Order Sections (MAX274)
• 4th-Order-Two 2nd-Order Sections (MAX275)
• Center-Frequency Range:
  • 150kHz for MAX274
  • 300kHz for MAX275
• Low Noise:
  • -86dB THD Typical for MAX274
  • -89dB THD Typical for MAX275
• Center-Frequency Accurate Over Temp:
  • within ±1% for MAX274
  • within ±0.9% for MAX275

Anwendungsbereiche

• Audio/Sonar/Avionics Frequency Filtering
• DAC Output-Smoothing Filters
• Low-Distortion Anti-Aliasing Filters
• Modems
• Vibration Analysis

(Produktbild: Diagramm)

Technische Parameter

• 
  Anzahl von Kanälen
  
• 
  1
  
• 
  Cutoff Frequency
  
• 
  300 kHz
  
• 
  Supply Voltage Max
  
• 
  11 V
  
• 
  Supply Voltage Min
  
• 
  4.74 V
  
• 
  Maximale Betriebstemperatur
  
• 
  + 70 C
  
• 
  Montageart
  
• 
  SMD/SMT
  
• 
  Verpackung / Koffer
  
• 
  SOIC-20 Wide
  
• 
  Verpackung
  
• 
  Reel
  
• 
  Minimale Betriebstemperatur
  
• 
  0 C
  
• 
  Betriebsspannung
  
• 
  5 V
  

MAX275ACWP-T Datasheet

• MAX275 data sheet for guidance

  Herunterladen von