The MAX270/MAX271 are digitally-programmed, dual second-order continuous-time lowpass filters. Their typical dynamic range of 96dB surpasses most switched capacitor filters which require additional filtering to remove clock noise. The MAX270/MAX271 are ideal for anti-aliasing and DAC smoothing applications and can be cascaded for higher-order responses.
The two filter sections are independently programmable by either microprocessor (μP) control or pin strapping. Cutoff frequencies in the 1kHz to 25kHz range can be selected.
The MAX270CWP-T has an on-board, uncommitted op amp, while the MAX271 has an internal track-and-hold (T/H).
Charakterisierung
- Continuous-Time Filtering – No Clock Required
- Dual 2nd-Order Lowpass Filters
- Sections Independently Programmable: 1kHz to 25kHz
- 96dB Dynamic Range
- No External Components
- Cascadable for Higher Order
- Low-Power Shutdown Mode
- Track-and-Hold (MAX271)
Anwendungsbereiche
- Anti-Aliasing and Track-and-Hold (MAX271)
- Anti-Aliasing Filter
- Low-Noise Applications
- Lowpass Filtering
- Output Smoothing
(Produktbild: Diagramm)
Technische Parameter
-
Anzahl von Kanälen
-
2
-
Cutoff Frequency
-
25 kHz
-
Supply Voltage Max
-
16 V
-
Supply Voltage Min
-
4.75 V
-
Maximale Betriebstemperatur
-
+ 70 C
-
Montageart
-
SMD/SMT
-
Verpackung / Koffer
-
SOIC-20 Wide
-
Verpackung
-
Reel
-
Minimale Betriebstemperatur
-
0 C
-
Betriebsspannung
-
5 V, 9 V, 12 V, 15 V
MAX270CWP-T Datasheet
-
MAX270 data sheet for guidance
Herunterladen von